Quick Settings; Initial Configuration - Huawei NetCol8000-A Series User Manual

NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual

5.3 Quick Settings

Prerequisites
After the system is powered on, the LCD is started, and the progress bar in the startup screen
is full:


Procedure
Step 1 Set the language and tap Next, as shown by (1) in
Figure 5-3 Quick settings
Step 2 Set the time and date and tap Next, as shown by (2) in
Step 3 Set system parameters and tap Finish, as shown by (3) in
Step 4 The system displays a dialog box for confirming the rated voltage. Tap Yes after confirmation,
as shown by (4) in
----End

5.4 Initial Configuration

Issue 10 (2019-01-15)
For initial power-on, the system enters the quick setting screen. Set the parameters by
following the instructions in this section.
For non-initial power-on, the LCD automatically enters the home screen as shown in
Figure 5-1.
Figure 5-3.
Copyright © Huawei Technologies Co., Ltd.
Figure 5-3.
Figure 5-3.
Figure 5-3.
5 ACC Introduction
89