NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual
----End
5.8 How to Perform Quick Settings
Context
Procedure
Step 1 Choose Settings > Quick Settings on the home screen. The quick settings screen is displayed,
as shown by (1), (2), (3) and (4) in
----End
5.9 How to Set the Language, Date, or Time
Context
Issue 10 (2019-01-15)
Figure 5-45 Confirming to calibrate the screen
c.
Wait for 10 seconds or tap Yes.
Figure 5-44
is displayed, the adjustment is complete.
d.
Flip toggle switch 4 for the LCD to non ON.
After the DIP switch is calibrated, flip toggle switch 1 to ON, and others to the opposite position.
You need to manually operate the operation again from the first step to trigger the touchscreen
calibration function after the calibration failure.
On the quick settings screen, you can set the language, time, date, and system.
The Guest user can perform quick settings only during the initial power-on. If you need
to perform quick settings in other scenarios, log in as the Admin, Engineer, or
Operator user.
Enter the User Settings screen to set the Language, Date format, Date, Time, Time
zone, Password. You can also set LCD contrast, LCD saturation, LCD brightness
and LCD backlight off delay on the screen.
To set the preceding parameters, log in as the Admin, Engineer, or Operator user.
Copyright © Huawei Technologies Co., Ltd.
Figure 5-43
is displayed. Tap the screen. When
Figure
5-3.
5 ACC Introduction
123