How To Perform Quick Settings; How To Set The Language, Date, Or Time - Huawei NetCol8000-A Series User Manual

NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual

5.8 How to Perform Quick Settings

Context
●
●
Procedure
Step 1 Choose Settings > Quick Settings on the home screen. The quick settings screen
is displayed, as shown by (1), (2), (3) and (4) in
----End

5.9 How to Set the Language, Date, or Time

Context
●
●
Procedure
Step 1 On the home screen, choose Settings > User Settings.
Issue 12 (2020-10-28)
c. Wait for 10 seconds or tap Yes.
When Figure 5-44
d. Flip toggle switch 4 for the LCD to non ON.
NO TE
● After the DIP switch is calibrated, flip toggle switch 1 to ON, and others to the opposite
position.
● You need to manually operate the operation again from the first step to trigger the
touchscreen calibration function after the calibration failure.
On the quick settings screen, you can set the language, time, date, and
system.
The Guest user can perform quick settings only during the initial power-on. If
you need to perform quick settings in other scenarios, log in as the Admin,
Engineer, or Operator user.
Enter the User Settings screen to set the Language, Date format, Date,
Time, Time zone, Password. You can also set LCD contrast, LCD saturation,
LCD brightness and LCD backlight off delay on the screen.
To set the preceding parameters, log in as the Admin, Engineer, or Operator
user.
Copyright © Huawei Technologies Co., Ltd.
Figure 5-43
is displayed, the adjustment is complete.
Figure
5 ACC Introduction
is displayed. Tap the screen.
5-3.
Figure 5-46 is displayed.
129