Querying System Parameters - Huawei NetCol8000-A Series User Manual

NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual
●
Figure 5-31 Compressor running status

5.6.6 Querying System Parameters

Context
You can query the system parameters through two ways.
●
●
Procedure
●
Issue 12 (2020-10-28)
NO TE
The actual number of devices is displayed on the screen. If two indoor fans are used, indoor
fan 1 and indoor fan 2 are displayed. This is also the case for other devices.
When querying component status through Device Details (using the
compressor as an example), choose Running > Device Details > Compressor
on the home screen to query the status of the compressor and solenoid valve,
as shown in Figure 5-31.
Enter the Operating Info screen that displays the major system parameters
such as the current detected temperature, humidity, voltage, and power
frequency.
Enter the Device Details screen and then enter the menu of a specific
component. All parameters for the component are displayed.
When querying system parameters through Operating Info, choose Common
Functions > Operating Info, or Running > Operating Info on the home
screen, the related screen is displayed.
after choosing Running > Operating Info.
Copyright © Huawei Technologies Co., Ltd.
Figure 5-32 shows the screen displayed
5 ACC Introduction
120