NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual
Figure 7-22 Removing cables and screw from the water injection solenoid valve
Step 3 Fix the connective nut using an adjustable wrench, and loosen the nuts at both
ends using an adjustable wrench. Then remove the water injection solenoid valve.
Keep the connection nuts aside for reinstallation purpose. Apply yellow glue to the
nut of the water inlet pipe, and install the solenoid valve.
Issue 12 (2020-10-28)
NO TICE
Copyright © Huawei Technologies Co., Ltd.
7 System Operation and Maintenance
196