Changing Parameters; Deleting Historical Alarms - Huawei NetCol8000-A Series User Manual

NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual
Step 2 On the About screen, tap Version Info or E-label.
Figure 5-35 Version info and E-label
----End

5.7 Changing Parameters

5.7.1 Deleting Historical Alarms

Context
To delete historical alarms, log in as the Admin user.
Exercise caution when deleting all historical alarms. Because this operation may
cause clearance of all historical alarms and affects device maintenance.
Procedure
Step 1 On the home screen, choose Alarms > Delete Hist. Alarms to enter the Delete
Hist. Alarms screen shown in
Issue 12 (2020-10-28)
NO TE
● The Version Info screen includes the version details of the display panel, control board,
temperature and humidity collection board, and compressor drive board. The E-label
screen displays electronic labels of the entire system, control board, display panel,
temperature and humidity collection board, compressor drive board, and so on.
● When some T/H boards of the cold or hot aisles are enabled, T/H Board on the About >
Version Info screen, or T/H Board on the About > E-label screen shows the
information of these T/H boards.
● When some T/H boards of the cold or hot aisles are disabled, T/H Board on the About
> Version Info screen, or T/H Board on the About > E-label screen does not show the
information of these T/H boards.
NO TICE
Copyright © Huawei Technologies Co., Ltd.
Figure 5-35
Figure 5-36.
5 ACC Introduction
is displayed.
122