Setting Communications Parameters (Ip Settings) - Huawei NetCol8000-A Series User Manual

NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual
Parameter
Return-air
temp set point,
Return-air
humid set
point
----End

5.4.4 Setting Communications Parameters (IP Settings)

Context
To set communications parameters, log in as the Admin, or Engineer user.
Procedure
Step 1 On the home screen, choose Settings > Comm Settings > IP Settings.
is displayed.
Figure 5-7 IP settings
Step 2 Set the parameters by referring to
Table 5-3 IP address settings
Parameter
IP assigning
mode
IP address
Subnet mask
Issue 12 (2020-10-28)
Description
Sets the required
humidity and
temperature in a
room or aisle.
Setting Method
Set according to the actual plan.
Set according to the actual plan.
Set according to the actual plan.
Copyright © Huawei Technologies Co., Ltd.
Configuration Principle
The ACC controls the temperature and
humidity based on the set value. For
example, if Return-air temp set point
is set to 30.0, and Return-air humid set
point is set to 25.0, the ACC will control
the temperature and humidity around
the return-air vent of the smart cooling
product to a temperature of 30°C and
humidity of 25% RH.
Table 5-3.
5 ACC Introduction
Figure 5-7
98