Querying Alarms - Huawei NetCol8000-A Series User Manual

NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual
Figure 5-24 T/H curve screen
----End

5.6.2 Querying Alarms

Context
On the alarm querying screen, you can query active alarms and historical alarms.
●
●
Procedure
●
Issue 12 (2020-10-28)
NO TE
● The temperature curve (upper) and the humidity curve (lower) are displayed on the
same screen. The abscissa shows time. The temperature set point is the midpoint
temperature on the upper ordinate while the humidity set point is the midpoint
humidity on the lower ordinate.
● The temperature and humidity curves show the current average temperature and
humidity of the control type.
● You can tap and
humidity ordinate. The midpoint temperature is the temperature set point and the
midpoint humidity is the humidity set point after the ordinate range is zoomed in or
out.
● You can view the temperatures from (temp set point - 3°C) to (temp set point + 3°C) at
least and from (temp set point - 30°C) to (temp set point + 30°C) at most.
● You can view the humidity from (humidity set point - 5%) to (humidity set point + 5%)
at least, and from (humidity set point - 50%) to (humidity set point + 50%) at most.
Specific humidity fluctuation range displayed varies according to different models of
smart cooling products.
The active alarm screen displays active alarms.
The historical alarm screen displays the historical alarms. You can query
historical alarms by choosing Common Functions > Query Hist. Alarms or
Alarms > Query Hist. Alarms.
To query the active alarm, choose Alarms > Query Act. Alarms.
is displayed.
Copyright © Huawei Technologies Co., Ltd.
to zoom in or out the range of the temperature and
5 ACC Introduction
Figure 5-25
116