Querying Parameters; Querying Temperature And Humidity Curves - Huawei NetCol8000-A Series User Manual

NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual
●
●
Procedure
Step 1 Enter diagnostic mode.
Step 2 Tap On for Electric heater, as shown in
Figure 5-23 Starting up the electric heater
After the electric heater is started, the Off following the Electric heater turns into
On.
----End

5.6 Querying Parameters

5.6.1 Querying Temperature and Humidity Curves

Context
The T/H Curve screen displays temperature and humidity curves showing the
recent temperature and humidity changes. You can choose to display the curves
showing data changes of recent one hour, one day, seven days, or 30 days.
Procedure
Step 1 On the home screen, tap T/H Curve.
Issue 12 (2020-10-28)
For details about the parameters and specifications to be set, see the
commissioning chapter in the user manual of each smart cooling product.
This chapter describes how to commission smart cooling product components,
using the electric heater as an example.
Copyright © Huawei Technologies Co., Ltd.
Figure 5-23.
Figure 5-24 is displayed.
5 ACC Introduction
115