Connecting The Voltage Jumper; Connecting Signal Cables - Huawei NetCol8000-A Series User Manual

NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual
Figure 3-44 Zoomed-in view of the power port

3.6.4 Connecting the Voltage Jumper

● The voltage jumper was shipped to the site (only NetCol8000-A050 needs to be
connected the voltage jumper).
● Before connecting the voltage jumper, verify that the voltage jumper matches
the mains voltage.
Ensure that the voltage labeled on the voltage jumper is the same as of the local
power supply. Then connect the two voltage jumpers.
voltage jumpers. 4 in
Figure 3-45 Voltage jumper

3.6.5 Connecting Signal Cables

Issue 12 (2020-10-28)
NO TE
The power cable of the NetCol8000-A100 must be secured by the cable clamp indicated,
the power cable of the NetCol8000-A050 must be secured by cable ties.
NO TICE
Figure 3-42
Copyright © Huawei Technologies Co., Ltd.
Figure 3-45
shows the interconnection position.
3 Installation Guide
shows the
65