Connecting The Voltage Jumper - Huawei NetCol8000-A Series User Manual

NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual
Figure 3-44 Zoomed-in view of the power port

3.6.4 Connecting the Voltage Jumper



Ensure that the voltage labeled on the voltage jumper is the same as of the local power supply.
Then connect the two voltage jumpers.
3-42
Figure 3-45 Voltage jumper
Issue 10 (2019-01-15)
The power cable of the NetCol8000-A100 must be secured by the cable clamp indicated, the power
cable of the NetCol8000-A050 must be secured by cable ties.
The voltage jumper was shipped to the site (only NetCol8000-A050 needs to be connected
the voltage jumper).
Before connecting the voltage jumper, verify that the voltage jumper matches the mains
voltage.
shows the interconnection position.
Copyright © Huawei Technologies Co., Ltd.
Figure 3-45 shows the voltage jumpers. 4 in
3 Installation Guide
Figure
62