Removing The Protective Device From The Netcol8000-A; Removing The Protective Device From The Infrared Humidifier Lamp - Huawei NetCol8000-A Series User Manual

NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual
Toggle
Switch
4
5
6
7
8
3.7 Removing the Protective Device from the
NetCol8000-A
3.7.1 Removing the Protective Device from the Infrared
Humidifier Lamp
Prerequisites
Need to remove the protective device and the signal cable to the high water level detection
switch from the protective device for the lamp only for the NetCol8000-A100 lamp before
connection.
Procedure
Step 1 Remove the screws, and slowly take out the sheet metal without damaging the cables, as
shown in
Issue 10 (2019-01-15)
Default
Value
ON
OFF
ON
OFF
ON
Figure 3-54.
Copyright © Huawei Technologies Co., Ltd.
Operation
Remaining "ON".
Remaining "OFF".
Remaining "ON".
 Non-teamwork situations: remaining "OFF".
 For teamwork situations, set toggle switch 7 of the
first and last smart cooling products to "ON" and
toggle switch 7 of other units to "OFF".
Remaining "ON".
3 Installation Guide
69