Huawei NetCol8000-A Series User Manual page 50

NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual
Procedure
Step 1 Remove the tooling beam of the indoor fan from the tooling body by removing the two
M6x16 bolts.
Figure 3-19 Removing the tooling beam of the indoor fan
Step 2 Remove the two M8x20 bolts on the cover plate of the flow deflecting ring on the indoor fan.
Figure 3-20 Removing the bolts on the cover plate of the flow deflecting ring
Step 3 Install the tooling beam onto the cover plate of the flow deflecting ring by using two M8x20
bolts.
Issue 10 (2019-01-15) Copyright © Huawei Technologies Co., Ltd.
3 Installation Guide
41