NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual
Figure 6-22 Removing cables and screw from the water injection solenoid valve
Step 3 Fix the connective nut using an adjustable wrench, and loosen the nuts at both ends using an
adjustable wrench. Then remove the water injection solenoid valve.
Keep the connection nuts aside for reinstallation purpose. Apply yellow glue to the nut of the
water inlet pipe, and install the solenoid valve.
Issue 10 (2019-01-15)
Copyright © Huawei Technologies Co., Ltd.
6 System Operation and Maintenance
175