Huawei NetCol8000-A Series User Manual page 101

NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual
Table 5-1 Note for the page
No.
1
2
3
4
5
6
7
8
9
Issue 12 (2020-10-28)
Items
Communication status
between the display
panel and the main
control board
USB status
Diagnostic mode
The buzzer status
The current critical
alarm and their
quantity
The current major
alarm and their
quantity
The current warning
and their quantity
The status bar
The alarm bar
Copyright © Huawei Technologies Co., Ltd.
Note
in the status bar indicates that the
display panel communicates properly with the
main control board. If
position in the status bar, the communication
fails.
in the status bar indicates that the USB
flash drive is successfully connected to the
display panel.
in the status bar indicates that the smart
cooling product is in diagnostic mode. Tap the
icon to exit from the diagnostic mode.
You can tap in the status bar to quickly
mute the buzzer. Or, you can tap
enter the active alarm screen to mute the
buzzer. If you are already in the alarm screen,
the buzzer cannot be muted even if you tap
after the buzzer is muted.
refers to the current critical alarm
signals and their quantity.
refers to the current major alarm
signals and their quantity.
refers to the current warning alarm
signals and their quantity.
N/A
You can tap
alarm bar to enter the active alarm screen that
displays all active alarms.
5 ACC Introduction
is displayed in this
in the alarm bar to
. is changed to
in the
92