Automatic Error Log; Adding Bookmarks; Extracting Logs - GE Vivid i n Service Manual

Hide thumbs Also See for Vivid i n:

Table of Contents

Automatic Error Log

The Vivid i n/ Vivid q N automatically logs the software activity, sequences and error messages that

occur during normal operation. Each day's activity is compressed into a single daily logger report, with

a time stamp appearing in each line of the report. Additional user comments and screen captures, can

also be included in the report. Each day's report is saved in the system for 90 days, during which time

they can be recalled and saved to disk.

One of the new features added in version BT06 is the ability to add bookmarks. When a problem occurs

during regular use of the system, simply press < Alt+B >. This action will insert a "bookmark" into the

system failure logs. The message Log is Bookmarked will be displayed on the prompt line, as shown in

the example in

The bookmark will allow users to place a time-stamp where a particular problem has occurred, while

continuing with their current activity with minimum interruption.

The log file bookmark will later make it easy for service engineers to locate the location of

the failure logging more precisely.

Whenever log extraction is necessary due to the occurrence of an error that needs to be reported, or

any other reason, follow the instructions below:

1.) While the system is turned-ON in any mode, press <ALT + D> on the alphanumeric keyboard.

The System Problem Reporting dialog opens - see

2.) In the Description of Issue window, type a description of the problem.

Notes should be made regarding the selected probe, the imaging mode and the application that was

being used at the time of the malfunction.

If applicable, try to describe the button or key-pushing sequence that immediately preceded the

If applicable, activate the System Lockup checkbox.

Figure 7-143 Message Showing Bookmark Added to Log

Section 7-8 - Automatic Error Log

IVID I N AND

Figure 7-144 on page