Table of Contents
Advertisement
GE H
EALTHCARE
D
FQ091013, R
IRECTION
4-2-5-6
Eject and Remove DVD/CD from DVD/CD Drive
NOTICE
Do not eject the DVD/CD using the button on front of the DVD/CD Drive.
In some cases, the DVD/CD media is ejected automatically. If not automatically ejected, use the manual
ejection method as described in the following steps:
1.) Select the Eject button on the screen.
OR
Press <Alt> + E on the alphanumeric keyboard to display the Eject Device menu
2.) Select CD-Rewriteable in the Eject Device menu to eject the DVD/CD media.
3.) Remove the ejected DVD/CD media from the drive and place it in its cover box for storage in a safe
place.
4-2-6
Labeling Removable Media
Before you start to format any Removable Media, be sure about what naming convention you will use
for labelling.
•
Use a logical name and make sure to physically label each Removable Media.
•
Verify that each Removable Media is given a unique name. Maximum eleven (11) characters may
be used for the label name.
•
Remember that MO Disks have two sides, Side A and Side B. Each Side must have a unique name.
Example:
MO Disks for storing images may be labeled "IMAGE_1A" (Side A on MO Disk #1), "IMAGE_1B (Side
B on MO Disk #2), "IMAGE_2A"...
4-2-7
Formatting Removable Media
This procedure describes how to format an MO Disk or DVD/CD media.
Before you continue, be sure about what naming convention you will use for labelling the Removable Media.
NOTE:
Use only CD-R, DVD-R or DVD+R media from a reputable vendor and only high-grade
media types.
NOTE:
For BT06 systems, it is not possible to use DVD+R media (only CD-R or DVD-R).
1.) Select Config > Connectivity > Tools.
2.) Select the removable media from the Tools pop-up menu.
3.) Enter a name for the removable media in the Label field.
4.) Press Format.
5.) Wait for display of the Information window, indicating that the formatting process is completed.
NOTICE
Do not eject the DVD/CD using the button on the DVD/CD drive.
6.) Press <Alt> + E on the alphanumeric keyboard to display the Eject Device menu
page
7.) Select the relevant media.
The selected media is ejected.
1
EVISION
4-13)
Chapter 4 - General Procedures and Functional Checks
V
V
N S
IVID I N AND
IVID Q
(Figure
(Figure 4-6 on
M
ERVICE
ANUAL
4-6).
4-15
Advertisement
Table of Contents
