Siemens SIREMOBIL Iso-C Service Instructions Manual page 119

Brakes / Movements
Fig. 4
Vertical lift brake
WARNING
•
Remove the basic unit cover.
•
Carefully place the SIREMOBIL Iso-C on its side.
•
Remove plug D30.X8 and eject the contacts.
•
Remove the three attachment screws for the vertical lift brake and replace the brake.
•
Remove plug D30.X8.
•
Eject the contacts from plug D30.X8.
•
Route the wires of the new vertical lift brake to board D30 and insert the contacts in the
plug housing.
Siemens AG
Medical Solutions
Risk of injury!
Noncompliance can lead to medium to severe injuries and/or
property damage.
To replace the vertical lift brake, the SIREMOBIL Iso-C must be
placed on its side. This requires 6 people. To prevent damage to
the SIREMOBIL Iso-C or the floor, we recommend using several
wool blankets or corrugated cardboard or other suitable floor
covering.
SPR2-230.061.01
Rev. 13
Fig. 5
Page 5 of 10
12.04 CS PS 24
7 - 5
SIREMOBIL Iso-C
System Manual