Configuring The Memoskop; Memoskop C-E, Keyboard Emulation; Configuring The Video Frequency - Siemens SIREMOBIL Iso-C Service Instructions Manual

Adjustments / Programs
Function:
Roadmap K-factor, phase B
Roadmap K-factor, phase C Noise suppression, phase C, is programmed in the road-
Roadmap Time of phase A
(1) in menu Diagnostics

Configuring the MEMOSKOP

MEMOSKOP C-E, keyboard emulation

There is no keyboard supplied with some SIREMOBIL Iso-C units and installed
MEMOSKOP C-E.
When replacing the MEMOSKOP C-E or when changing the configuration, the
MEMOSKOP service program should be used.
The help file "C-DATA.hlp" will be copied to the service PC during installation of the
MEMOSKOP service program. The "C-DATA.hlp" help file contains descriptions of the
programming.

Configuring the video frequency

After replacing the MEMOSKOP, it will start at a default video frequency (50 Hz). If the
monitors were configured for a different frequency, you will have to configure the
MEMOSKOP.
Without installed MEMOSKOP keyboard:
•
Use the MEMOSKOP service program to modify the configuration.
With installed MEMOSKOP keyboard:
•
Invoke Technical Setup on MEMOSKOP (press the CTRL + T keys).
•
Press the "2" key and press return. The video frequency menu is selected.
•
Depending on the required video frequency, press the right cursor key "->".
"->" pressed 1 time:
"->" pressed 2 times:
"->" pressed 3 times:
"->" pressed 4 times:
"->" = Press the right cursor key
Key "->":
Video frequency
Key "<-":
"<-" = Press the left cursor key
Siemens AG
Medical Solutions
Comments:
Noise suppression, phase B, is programmed in the road-
map mode.
Phase B: Acquisition of fill images.
map mode.
Phase C: Acquisition of roadmap images.
The time of phase A in the roadmap mode is programmed.
Phase A: Mask acquisition.
60 Hz video frequency
100 Hz video frequency
120 Hz video frequency
50 Hz video frequency
(Start "->" "->"
50 Hz 60 Hz 100 Hz
"<-" "<-" "<-"
SPR2-230.061.01
Rev. 13
"->" "->"
120 Hz 50 Hz
"<-" "<-"
Page 29 of 30
12.04 CS PS 24
5 - 29
...
etc...
"<-"
SIREMOBIL Iso-C
System Manual
5
5
5