Siemens SIREMOBIL Iso-C Service Instructions Manual page 124

7 - 10
•
After the counterbalance weights have been reinstalled on both sides, move the C-arm
orbitally from one end to the other several times.
•
In the case of SIREMOBIL Iso-C 3D, additionally perform a scan.
•
If the belt tension is still insufficient, repeat the procedure and place the belt into the next
tooth to shorten it further.
SIREMOBIL Iso-C
System Manual
SPR2-230.061.01
Rev. 13 12.04
Brakes / Movements
Page 10 of 10
CS PS 24
Siemens AG
Medical Solutions