Configuring Qam Ports - Motorola APEX1000 Installation And Operation Manual

Item
Config All
Status
ASI Monitor Port TS
Pre/Post Encryption

Configuring QAM Ports

To configure Operating Mode and PID re-mapping settings, click Config All in the
Output TS Configuration
CAUTION Configuring QAM Ports is a bulk operation that affects all of the Output Transport
Streams in that particular group.
Configuration • Configuring QAM Ports
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
Definition/Range
Clicking Config All displays the Configure All window.
Use this window to specify and configure QAM RF Ports for operating mode,
PID Remapping mode, and encryption mode.
Note: After configuring the outputs, click Apply to implement the changes.
Offers a list of quick links to various status windows.
Shows the number of the transport stream to route to the ASI Monitor Port on
the front panel.
Range: 0 – 48
A zero indicates that no stream is to be routed to the ASI Monitor Port.
Use this drop-down menu to select pre or post encryption.
•
Pre-encryption outputs the stream being monitored prior to being encrypted
(packets are not scrambled and are viewable), but still contains all encryption
messages (ECMs).
•
Post-encryption outputs the stream being monitored after the services have
been encrypted (packets are scrambled and are not viewable).
window:
B
131