Host Packet Statistics - Motorola APEX1000 Installation And Operation Manual

Item
Index
Time Logged
Alarm Code
Alarm Severity
TS:QAM
Rate
Description

Host Packet Statistics

This window offers three menu tab choices:
•
Packet Insertion Statistics
•
Host IP Packet Statistics
•
Host IP Input Statistics
Packet Insertion Statistics
Shows the read-only average number of packets inserted per second, the insertion rate,
and the total number of packets inserted for a specified time interval (for example, five
seconds) for each interface output port by service number (1 – 48).
A section of the Packet Insertion Statistics window is illustrated below:
Status • Reports
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
Output TS Events window field definitions
Definition
Identifies the window line item.
Shows the time when the event was logged.
The event code specifies which error occurred for this entry in the error
log.
Examples of current error codes are:
•
8040 – Output Utilization Threshold Exceeded
•
8041 – Output Overflow
Shows the alarm severity level of this event.
Shows the Output Transport Stream number and the Output QAM
channel.
This field can be Data Rate or TS Rate.
Provides a text description of the event.
Possible events are:
•
Output Utilization Threshold — Indicates that the output stream rate
exceeded the user-specified threshold percentage. This does not
necessarily mean an overflow has occurred, but that the rate is over the
user- specified maximum rate, based on threshold percentage.
•
Output Overflow — Output stream has overflowed (output rate
exceeded). This is possibly due to improperly mapping input streams to
the same output or input streams that have not been properly rate-
shaped.
B
265