Motorola APEX1000 Installation And Operation Manual page 250

Item
RDS Error
Current CSN In Use
(0-255)
Time Until CET Polls
Time Until RMD Polls
Current Multicast-16
In Use
Communication
Errors
Reset Counts
Messages Received
Messages Failed
Flash Write Count
Communication
Status
Connection Status
Status • Reports
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
Definition/Range
RDS Communication Error – Cannot communicate with the RDS after three (3)
polling attempts.
Alarm – Major. Clears when communication is successfully restored.
This is the current Category Sequence Number (CSN) that the APEX is using for
encrypting all programs. When the last poll indicates that the RDS server is
starting or that it has completed a category epoch transition, the current CSN in
use is one larger than the last CSN reported by the RDS server. Otherwise, the
current CSN in use is equal to the last CSN reported by the RDS server.
Shows the time remaining until the next CET poll.
Shows the time remaining until the next RMD poll.
Displays the 16-bit address used for building PRKs (Program Rekey Messages).
The number of times that the APEX was unable to establish communications
with the Rights Data Server. A communication is considered to be in error after all
user configurable RDS Polling Retry Counts have been exhausted.
This count resets at system boot. You can also manually reset it using the
adjacent Reset Counts button.
Resets RDS communication error counts.
Shows the number of successful ServiceEncrypt Messages received in the last
15 minutes.
Shows the number of failed ServiceEncrypt Messages received in the last 15
minutes.
Shows the running count of the number of Flash Memory erasures/writes.
Current communication status with RDS. Error state is set after the configured
number of retries is reached.
OK (1)
Error (2)
State of communications with the DAC RDS for the purpose of retrieving EMMs
or RMD.
States can vary depending on the condition of the connection, and can include:
•
Not Connected – In Initial Hold-off Period
•
Not Connected – No RDS IP Address Configured
•
CSN Acquisition Successful
•
EMM Acquisition Successful
•
Service List Acquisition Successful
•
RMD Acquisition Successful
•
CSN Acquisition Failed
•
EMM Acquisition Failed
•
Service List Acquisition Failed
•
RMD Acquisition Failed
B
232