Apex1000 Front Panel - Motorola APEX1000 Installation And Operation Manual

APEX1000 Physical Specification
Overall depth from front panel to end of
fan studs
Depth from mounting ears to rear panel
Width
Height
Approximate Weight
Mounting
For complete physical, electrical, and environmental details, see the
section of this guide.

APEX1000 Front Panel

The Front Panel of the APEX1000 includes:
•
Four Gigabit Ethernet
•
Two Fast Ethernet interfaces
•
Two DTI (DOCSIS
The APEX1000's front panel also includes a bank of LEDs that provide status associated
with RF output ports (such as an RF error), and an overall Summary Status of the device.
Each GbE, FastE, and DTI port also includes integrated LEDs to provide status
information.
For additional LED/Error Conditions details, see
Monitoring Ports
For easy access, a Console Port and an ASI Monitor Port are also located on the
APEX1000's front panel. To allow user access to a set of limited menus, such as boot
mode selection and OAM&P Fast Ethernet IP address/mask entry, the Console Port
provides a serial interface.
The ASI monitor port provides access to any one of the 48 possible Multi Program
Transport Streams created by the APEX1000. This output is provided to the ASI monitor
port in parallel with the MPTS's targeted output to a QAM port.
For further information, see
Overview • Physical Overview
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
Value
24.9 inches (632mm)
23.5 inches (597mm)
19 inches (483mm)
1.72 inches (43.7 mm)
23 lbs (10.4 Kgs)
Rack mount
®
Timing) interfaces
RS-232 Test Console
Specifications
LED/Error Indications.
Port.
B
7