The Program Mapping window displays:
In this window, you can manually map services or an entire transport stream from input
to designated output interfaces.
Enabling Program Mappings
Every entry in both lists is directly editable. A mapping row that is not enabled will
display in the Available Mappings panel.
To enable program mappings:
1. Check the Enable box to select one or more rows in the Available Mappings panel.
2. Enter the remaining selections for that row.
3. Repeat step 2 for each selected row.
4. Click Apply.
5. Click Refresh to update the screen.
Note: When a row is enabled, it moves to the Active Mappings panel.
Manual Routing • Program Mapping
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
Figure 7-1 — Program Mapping window
B
136