Table of Contents
Advertisement
External EIS Configuration
Select this mode to configure the connectivity for the existing device in the SimulCrypt
network, acting as the EIS entity and performing the scrambling provisioning.
Note: You must the must reboot APEX for an EIS mode change to take effect.
Item
EIS TCP Port
SimulCrypt • EIS Configuration
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
Figure 10-9 — External EIS Configuration
External EIS Configuration window field definitions
Definition/Range
Specifies the local TCP server port to be used to communicate with the event
scheduler entity (EIS).
B
200
Advertisement
Table of Contents
