Table of Contents
Advertisement
Configuring QAM Modules
Next, to configure the QAM output modules, select Configuration > QAM
Configuration:
The QAM Configuration window displays:
To configure the QAM/RF interface:
1. Select the number of channels to enable from the Channels Enabled drop-down
menu.
2. Confirm that the QAMs are not muted by clearing the Mute checkbox.
3. Configure the EIA channel range for the QAM.
Configuring for Switched Digital Video • Step by Step Instructions
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
B
176
Advertisement
Table of Contents
