Rtsp Events; Figure 8-10 - Rtsp Events - Motorola APEX1000 Installation And Operation Manual

RTSP Events

This window shows the read-only status of QAM modules, controllers, and interfaces:
Item
Index
Time Logged
Controller IP
Session Count
Source
Description
Event
Description
SDV — Switched Digital Video Controls • RTSP Controller Configuration
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
Figure 8-10 — RTSP Events
RTSP Events window field definitions
Definition
Shows an index for the event.
Note: A maximum of 100 events can be logged.
Shows a timestamp of when the event occurred.
IP address of the controller which generated the event – external IP or 0.0.0.0 if the
event was generated by an internal task.
Number of sessions that were active at the time of the event.
Identifier for the Source of the event (external controller or internal task).
Text description of the event.
B
170