Rpc Qam Status; Figure 8-4 - Rpc Qam Status - Motorola APEX1000 Installation And Operation Manual

RPC QAM Status

This window displays the read-only status of each QAM output channel, the number of
active sessions on the QAM channel, and the bandwidth reserved (if in session
controlled mode).
Item Definition
TS:QAM
The Output Transport Stream number and Output QAM channel.
Number The Number of VOD/Broadcast sessions on this QAM channel. This is the number of
VOD/BC
VOD/Broadcast sessions active on a QAM channel.
Sessions
Given that VOD and Broadcast sessions are not required to be reserved for an output, this
is the count of active VOD and Broadcast sessions on a specific QAM channel.
Number The Number of reserved SDV sessions on this QAM channel.
Reserved
•
•
QAM The Group BW for SDV sessions (not used for VOD/Broadcast sessions). This is the total
Reserved
amount of BW allocated for all SDV sessions on a Port.
(Mbps)
•
•
•
SDV — Switched Digital Video Controls • RPC Session Control
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
Figure 8-4 — RPC QAM Status
RPC QAM Status window field definitions
This is the number of SDV sessions that have been reserved by the manager. (Each SDV
session requires that a manager reserve a QAM channel.)
This is the count of SDV sessions reserved (not the actual number of active SDV
sessions).
The total SDV BW for a port is defined by the session manager.
The manager reserves this BW for future SDV sessions.
This is not the BW of current active SDV sessions, but the total BW reserved by the
manager for SDV sessions.
B
162