Sdv - Switched Digital Video Controls; Session Controlled Mode - Motorola APEX1000 Installation And Operation Manual

8

Session Controlled Mode

Session Controlled Mode indicates the mode of a given output, in which streams are
routed to that output under the control of an external controller, using either RPC, RTSP,
or MHA protocols.
This section describes GUI functions and field reference values. For step-by-step Quick
Start instructions, consult the
section of this manual.
To begin configuring Session Control, select SDV > Session Control Config:
CAUTION After choosing a controller type in the Session Control Configuration window, you must
configure the APEX1000 for that mode (RPC, RTSP, or MHA) only. Do not use any other
menus.
SDV — Switched Digital Video Controls • Session Controlled Mode
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
SDV — Switched Digital Video
Configuring the APEX1000 for Switched Digital Video
B
Controls
156