Table of Contents
Advertisement
Item
Supplier
Supplier Part Number
Motorola Part Number
Nominal Bit Rate (Mbps)
Laser Wavelength (nm)
Temperature (Celsius)
Supply Voltage (V)
TX Bias Current (mA)
TX Output Power (dBm)
RX Input Power (dBm)
Update
SFP configuration information is polled after boot-up or after communication is
established with the module. The wavelength, vendor name, vendor part number, and
vendor revision are then displayed on the EM screen. The other parameters become
available on the APEX1000 MIB, and are recorded during a status capture.
Note: Diagnostic parameters are updated once per second. Alarms and warnings set
when measurements exceed vendor specified limits.
Status • Reports
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
SFP Status window field definitions
Definition
Physical Data
Displays the name of the SFP supplier.
SFP supplier's part number.
Motorola's part number.
Nominal signaling rate to nearest 100 Mbps.
Shows the device's laser wavelength.
Diagnostics
Shows the internally measured module temperature.
Shows the internally measured supply voltage.
Shows the internally measured TX bias current.
Shows the measured TX output power.
Shows the measured RX input power.
Click to refresh the information on the screen.
B
234
Advertisement
Table of Contents
