Identifying An Rfpm Or Filler Module; Removing An Rfpm Or Filler Module; Installing An Rfpm Or Filler Module - Motorola APEX1000 Installation And Operation Manual

Identifying an RFPM or Filler Module

As shown below, active RFPM modules include two RF connectors each, while RFPM
filler modules only include the cooling fan:
Note: When viewed from the back of the unit, #1 is the left QAM module, #2 is located
in the middle, and #3 is located on the right.

Removing an RFPM or Filler Module

1. Identify the RFPM or filler module to be removed.
2. Loosen the two captive screws that hold the module to the chassis.
3. Carefully slide the unit out completely.

Installing an RFPM or Filler Module

1. Identify the slot where the RFPM or filler module is to be installed.
Appendix E • RFPM and Power Supply Modules
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
B
303