Motorola APEX1000 Installation And Operation Manual page 210

All-purpose edge qam
Table of Contents

Advertisement

Item
General Settings
CAT Permanence
CAT Private Data
EMM Insertion
SimulCrypt • EMMG Configuration
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
EMMG Configuration screen field definitions
Definition/Range
EMM TCP Port
EMM UDP Port
Max Data Rate (kbps) Defines the maximum data rate expected per EMM
Client ID
CAS ID
Data
Client ID
Specifies the local TCP server port to receive incoming
control messages and EMM streams (when TCP
provisioning mechanism is used) from EMMG entities.
Specifies the local UDP port to receive EMM streams
(when using the UDP provisioning mechanism) from
EMMG entities.
stream.
Range: 0 – 3000 (Kbps)
This parameter also indicates the aggregated maximum
for all incoming EMM streams.
Caution: To prevent overloading the device processing
capabilities, you must configure it according to
SimulCrypt configuration guidelines.
Indicates that the CA_descriptor for a specific EMMG
entity (defined by the client identifier, including the
concatenation of CAS system and subsystem) must still
be played out–even if the connectivity with the client is
discontinued.
Note: Only those clients included in the list keep the
CA_descriptor in the CAT.
Defines if private data is required in the CAT for an
specific Conditional Access System. Only those
conditional access systems included in the list include
private_data within the CA_descriptor in the CAT.
Hexadecimal string (up to 20 values) to be inserted in the
CAT as private data for a specific Conditional Access
System.
Defines what output transport streams must play out
EMM messages for a specific EMMG entity (defined by
the client identifier in decimal notation, including the
concatenation of CAS system and subsystem).
Only one EMMG entity can be defined to exercise this
functionality.
EMM messages from the specified EMMG entity will
only be played out in transport streams that are
checked.
EMM messages from for all the other EMMG entities
will be played out in all output transport streams.
B
192

Advertisement

Table of Contents
loading

Table of Contents