ML-13000
User's Manual
C
Move to the rear of the machine and raise the tension bar.
When the main power switch is turned off, the tension bar lowers and rotates the feeding spindle, which
prevents the fabric from being pulled out excessively.
D
Make sure that all signal lamps are turned off, and then turn off the main power switch on the back of the
machine.
Print Adjustments
Perform Automatic Adjustment in case of following.
"Automatic Adjustment" on page 135
U
❏ Using new fabric not registered to the printer
❏ When banding (horizontal band-shaped patterns, uneven shading, or stripes) or graininess is observed in the
print result
❏ When the fabric type is the same but the width is different
❏ When you change the Advanced Settings after saving the Fabric Settings
Basic Operations
134