Table of Contents
Advertisement
ML-13000
User's Manual
Storage temperature
Ink supply unit capacity
Ink supply unit dimensions
Precautions and Applicable Standard for This Product
Restriction of Use for This Product
When this product is used for applications requiring high reliability/safety, such as transportation devices related
to aviation, rail, marine, automotive, etc.; disaster prevention devices; various safety devices, etc.; or functional/
precision devices, etc.; you should use this product only after giving consideration to including fail-safes and
redundancies into your design to maintain safety and total system reliability. Because this product was not
intended for use in applications requiring extremely high reliability/safety, such as aerospace equipment, main
communication equipment, nuclear power control equipment, or medical equipment related to direct medical
care, etc., please make your own judgment on this product's suitability after a full evaluation.
Precautions When Using the Control Panel
The screen may contain pixels that do not light up, or pixels that always light up. Also, due to the properties of the
liquid crystal, the brightness may be uneven. However, these are not malfunctions.
If it becomes dirty, wipe it with a dry, soft cloth. Do not use water or chemical cleaners.
If hit by a strong impact, the touch panel surface may break. If the touch panel surface is cracked or broken,
request repair. Do not touch the broken section or fragments.
Touch the panel softly with your fingers. Do not apply force or operate the panel with your nails.
Do not operate the panel with pointed objects, such as ball pens or pointed pens.
If the interior of the control panel is exposed to condensation due to rapid changes in temperature or humidity, it
could cause deterioration in operability.
Appendix
Ink Specifications
When storing with packaging: -20˚C TO 40˚C(-4 to 104 ˚F) (within 4 days for -20˚C (-4 ˚F),
within 1 month for 40˚C (104 ˚F))
When the machine is installed: -20˚C TO 40˚C (-4 to 104 ˚F) (within 4 days for -20˚C(-4
˚F), within 1 month for 40˚C (104 ˚F))
During packaging and transportation: -20˚C to 60˚C (-4 to 140 ˚F) (within 4 days for
-20˚C (-4 ˚F), within 1 month for 40˚C (104 ˚F), within 3 days for 60˚C (140 ˚F))
1600 ml
180 [W] × 410 [D] × 30 mm [H] (7.09 [W] × 16.14 [D] ×1.18 [H] inches)
391
Advertisement
Chapters
Table of Contents
