Precautions Regarding Maintenance - Epson ML-13000 User Manual

ML-13000 User's Manual
Required Items
Rubber roller
Flashlight

Precautions Regarding Maintenance

Note the following points when cleaning and replacing parts.
❏ Remove the fabric from the printer before proceeding with cleaning.
❏ Never touch the belts, circuit boards, or any parts that do not require cleaning. Failure to observe this
precaution could result in malfunction or reduced print quality.
❏ Always use fresh cleaning sticks. Re-using sticks can make stains even harder to remove.
❏ Do not touch the tips of the cleaning sticks. Oil from your hands could damage the print head.
❏ Do not use anything other than the specified cleaning liquid to clean the area around the print head and caps.
Using anything else could result in malfunction or reduced print quality.
❏ Touch a metallic object before starting work to discharge any static electricity.
Maintenance
Details/Use
Commercially available
Commercially available
If using glue or glue remover that contains flammable gas, explosive gas, or the like, ensure
sufficient ventilation and make sure that the ignition point and explosion limit are not reached.
For details, refer to the instructions of the SDS for the glue and glue remover you are actually
using.
Use to attach photography paper on the belt.
We recommend the following rubber rollers.
❏
Roller spindle: Made of metal that supports both
sides of the roller and does not deform even when
force is applied (rust-resistant aluminum is
recommended)
❏
Roller part: Made of hard rubber, weighing 400 g
or more
Use to illuminate the area where you are working
inside the machine, such as when cleaning the area
around the heads.
We recommend using free-standing lights, so that you
can use both hands when working.
WARNING
160