Installing The Blade - Epson ML-13000 User Manual

ML-13000 User's Manual
D
Apply tape to the opposite side of the belt, in the same way as Steps 1 to 3.
E
Press and hold the Backfeed button on the front panel to slowly rotate the belt as you check that the tape is
not floating up and there is no foreign material on the belt.
Press down any areas of tape that are floating up, and remove any foreign material using a wipe cloth or the
like.
c
Important:
If the tape is floating up, friction with the blade could cause the tape to tear during glue application. If the
tape tears, the glue cannot be applied uniformly; therefore, the tape must be reapplied.

Installing the blade

Prepare to apply the glue uniformly on the belt.
Maintenance
324