Applying Glue - Epson ML-13000 User Manual

ML-13000 User's Manual
C
Use the stirring rod for preparing glue to mix together glue A and glue B in the container.
Mix slowly to avoid trapping air.
D
Preparation is complete when the colors of the 2 glues are blended.

Applying Glue

Apply the glue you prepared to the belt.
A
Touch the Reverse button on the control panel.
The belt continues to move in reverse.
B
Pour a proper amount of glue to right next to the blade. Pour uniformly from one end of the belt to the
other.
It is not necessary to pour all of the glue at once.
As the glue accumulates in front of the blade, rotate the belt to apply glue slowly to the belt surface through
the gap between the blade and belt. As the glue decrease, pour in a proper amount of more glue.
Maintenance
332