Supported Fabric; Print Mode And Throughput - Epson ML-13000 User Manual

ML-13000 User's Manual
Product
Inner porous pad
Inner porous pad (for PT
liquid)
Inner pad
Sponge roller

Supported Fabric

The following fabric can be used with the printer.
Print quality is greatly affected by the type and quality of fabric used. Choose a fabric suited to the task at hand.
For information on use, refer to the documentation supplied with the fabric or contact the manufacturer. Before
buying fabric in large quantities, try printing on a smaller sample and check the results.
Roll core size
Outer diameter of the fabric roll
Fabric width
Fabric thickness
Roll weight
Fabric type

Print Mode and Throughput

Prerequisites: Bidirectional printing, print width 1,500 mm (59.06 inches), and Flush on Belt turned On
The throughput varies depending on the image, firmware, PC operating status, and print settings.
Resolution [dpi]
300 × 600
600 × 600
Appendix
Product No.
C13S400223
C13S400224
C13S400225
C13S400226
1-inch, 2-inch, 3-inch
1-inch paper core size: 50.8 to 200 mm (2 to 7.87 inches)
2-inch/3-inch paper core size: 50.8 to 400 mm (2 to 15.75 inches)
300 to 1850 mm (11.81 to 72.83 inches)
5 mm (0.20 inches) or less
1-inch paper core size: max. 20 kg (44.1 pounds)
2-inch/3-inch paper core size: max. 100 kg (44.1 pounds)
Cotton, silk, wool, PET, PA, viscose,
Nylon, various blends
Print mode
Number of passes
1
2
3
4
It is equivalent to the inner porous pad included with the
cleaning pads (for ink, Density Enhancer Liquid, and
Over-Coating Liquid).
It is equivalent to the inner porous pad included with the
cleaning pads (for Pre Treatment Liquid).
Equivalent to the inner pad included with the flushing pads.
Equivalent to the sponge roller included with the product.
Print waveform mode
ND mode
ND mode
ND mode
ND mode
383
Notes
Throughput
2
[m /h]
252
131
90
67