ML-13000
User's Manual
E
Set the felt mounting rod on the felt mounting plate and spread the felt to the front side of the product.
Ensuring safety
Perform ventilation and wear protective equipment, referring to the instructions of the SDS for the glue and glue
remover you are actually using, as well as the laws and regulations in your country.
Removing Glue
Use the glue remover and scrape the glue off the belt.
A
Touch the Forward button on the control panel.
The belt continues to move forward.
B
Place the glue remover bucket on the tray and put in approximately 2 L (67.63 ounces) of glue remover.
Use the pump to ensure the glue does not spill on the surroundings.
Maintenance
306