Setting The Print Position - Epson ML-13000 User Manual

ML-13000 User's Manual
Symbol Item
n Print Area
o Fabric
p Print data
q Fabric end nozzle check pattern
r Event Marking
s Flush on Belt
Note:
If the print width extends beyond the printable area due to the setting for the print start position, the image is trimmed by
the amount that extends beyond the printable area. If the actual print width is larger than the print width set on the
machine, the image will be cropped to the specified print width. Further, if Event Marking or Fabric End Nozzle Check is
turned ON, the area where Event Marking or Fabric End Nozzle Check is performed will also be cropped.

Setting the Print Position

For methods for setting a print position that matches function settings, refer to the patterns below.
Flush on Belt
Fabric end Nozzle Check Pattern
Event Marking
Pattern A
Flush on Belt
Fabric end Nozzle Check Pattern
Event Marking
Basic Operations
Value / Range
-
-
-
-
-
-
Pattern A Pattern B
OFF OFF
OFF ON
OFF ON
OFF
OFF
OFF
141
Setting method
-
-
RIP software
When using theEpson Edge Print,
see the Epson Edge Print help.
Control Panel
"Menu List" on page 342
U
Control Panel
"Menu List" on page 342
U
Control Panel
"Menu List" on page 342
U
Pattern C Pattern D
ON ON
OFF ON
OFF ON