Fujitsu ScanSnap N1800 Operator's Manual page 103

2. For [Authentication Mode], select an authentication mode.
When searching for authentication information in the LDAP server or local account,
the search order of authentication information can be selected.
ATTENTION
If [LDAP to Local] or [Local to LDAP] is selected, the operation becomes as follows.
If a password error occurred at the first authentication destination, the authentication
process moves to the next destination.
If an authentication error occurred at the first and next authentication destinations, a
notification of the details of the error that occurred in the first destination is sent.
HINT
When an alias is used for the administrator account, if a local account or LDAP user is
set with the same alias account name, login will be processed for the administrator
account. In this case, even if a password error occurs, login as a local account or LDAP
user cannot be performed.
The priority of the authentication destinations for the login is as follows:
1. Alias account
2. Order specified by [Authentication Mode]
3. For [Auto Login], select whether or not to enable automatic login.
ATTENTION
The automatic login setting is applied immediately after an administrator logout. To
change the settings while the [Auto Login] is [ON], perform administrator login from the
[Maintenance] window or perform the login via the Admin Tool.
If Central Admin is enabled in a scanner for which automatic login is enabled, when
the scanner is started or resumed from standby mode, preference is given to checking
for available scanner settings, add-in installs and system settings in the Central Admin
Server, over automatic login.
When scanner settings, Add-ins or system settings are available, they are installed in
the scanner. If the number of scanners connecting to the Central Admin Server
exceeds the maximum acceptable number, the installation is skipped, and automatic
login is performed.
Updates will be applied to the scanner when a logout is performed from the
[Administrator Login] window, when the scanner starts next time, or when the scanner
resumes from standby mode.
4.7 Configuring the Login-Related Settings
103