Fujitsu ScanSnap N1800 Operator's Manual page 295

11. Press the [Scan] button.
When [Scan Viewer] is [Off], this will be a [Scan&Save] button.
The scanning starts.
The scanning status and scan settings are shown during the scan.
The maximum number of pages that can be scanned is 999.
When [Blank Page Skip] is enabled, the number of scanned pages excluding
skipped blank pages is shown.
Additional pages can be scanned in place of skipped blank pages, until the
maximum number of scanned pages is reached.
When the scanning has completed, the [Scan Viewer] window appears.
For details about editing on the [Scan Viewer] window, refer to
Scanned Data in the Scan Viewer" (page
HINT
If the [Scan&Save] button is selected (when [Scan Viewer] is [Off]), the scanned data is
saved immediately after the scanning is completed, and the LCD touch panel screen
returns to the [Main Menu] window.
For details, refer to
12. Check the scanned data.
For more details about the [Scan Viewer] window, refer to
Scanned Data in the Scan Viewer" (page
13. On the [Scan Viewer] window, press the [Save] button.
HINT
When a file is overwritten, the properties of the existing file are replaced by those of
the new file.
When multiple files are saved in TIFF or JPEG format, identical properties are set to all
the files.
If required items other than [Single line of text] or [Multiple lines of text] are set for the
properties of the specified folder content types, files saved in the SharePoint folder will
be checked out. To change the checkout status, enter values for the required items via
a Web browser, and then check in the files.
A file in the specified file format is saved in the selected SharePoint folder.
6.8 Saving the Scanned Data to a SharePoint Folder
"6.10 Enabling/Disabling the Scan Viewer" (page
295
339).
"6.11 Editing the
339).
"6.11 Editing the
336).