Fujitsu ScanSnap N1800 Operator's Manual page 249

3. Enter an e-mail address in the [From] field.
This field can be entered if logged in with the guest account, that has no set e-mail
address.
For details about e-mail address settings values, refer to
Setting Values" (page
HINT
[From] e-mail addresses can be selected from the e-mail address book by pressing
.
For details, refer to
(page 253).
If the e-mail address book cannot be used, contact the administrator.
4. For [File Name], enter a file name for the scanned data attached to the e-
mail.
ATTENTION
The following file names cannot be used:
CON
PRN
AUX
CLOCK$
NUL
COM0 to COM9
LPT0 to LPT9
The following symbols cannot be used:
\ / : * ? " < > |
6.4 Sending the Scanned Data by e-Mail
423).
"6.4.1 Selecting an e-Mail Target from the e-Mail Address Book"
249
"B.1 e-Mail Address