Fujitsu ScanSnap N1800 Operator's Manual page 215

8. To start the Add-in module when the job button is pressed, select the
Add-in module to be started from [Add-in].
ATTENTION
If an Add-in module is not installed in a scanner, you cannot select it.
9. Select a job sequence from the list to set as the job button.
HINT
To filter jobs, enter the [Job Name] and [Comment] partially or completely, and press
the [Find] button.
10. Press the [OK] button.
A job button is set on the [Job Menu Layout] area.
11. Repeat Step 5
HINT
Up to six job buttons can be set.
To delete a job button, select the job button that you want to delete and press the
[Delete] button.
through Step 10 as required for the number of job buttons.
215
4.17 Setting a Job Sequence