Filtering The Ldap List - Fujitsu ScanSnap N1800 Operator's Manual

■ Filtering the LDAP List

This section describes how to filter the LDAP List on the [Job Group Member Settings]
window.
1. For [Filter Conditions] of the LDAP List, select the filtering method.
2. Enter the filter character string.
3. Select the filter target.
If multiple items are selected, a search operation tries to find entries containing any
of the search items.
4. Press the [Find] button.
The filtered results appear.
HINT
If the login LDAP server type is [Active Directory] or [Active Directory Global Catalog],
when the [Find] button is pressed, a confirmation window appears.
Enter a [User Name] and [Password], and then press the [OK] button.
User names may be up to 129 characters long.
Passwords may be up to 256 characters long. [User Name] and [Password] are case
sensitive.
To clear filtered results, delete all filter strings and then press the [Find] button.
If the number of filtered results on the [LDAP List] window, or the number of registered
job group members is large (1,000 at maximum), it may take tens of seconds until the
[Group Member Settings] window appears. This can be resolved by performing the
following.
Add a filter condition(s)
Reduce the [Maximum Results] specified on the [e-Mail LDAP Server] window
Divide job groups
Specify an Active Directory group
4.17 Setting a Job Sequence
226