Fujitsu ScanSnap N1800 Operator's Manual page 287

7. Press the [Scan] button.
When [Scan Viewer] is [Off], this will be a [Scan&Save] button.
The scanning starts.
The scanning status and scan settings are shown during the scan.
The maximum number of pages that can be scanned is 999.
When [Blank Page Skip] is enabled, the number of scanned pages excluding
skipped blank pages is shown.
Additional pages can be scanned in place of skipped blank pages, until the
maximum number of scanned pages is reached.
When the scanning has completed, the [Scan Viewer] window appears.
For details about editing on the [Scan Viewer] window, refer to
Scanned Data in the Scan Viewer" (page
HINT
If the [Scan&Save] button is selected (when [Scan Viewer] is [Off]), the scanned data is
saved immediately after the scanning is completed, and the LCD touch panel screen
returns to the [Main Menu] window.
For details, refer to
8. Check the scanned data.
For more details about the [Scan Viewer] window, refer to
Scanned Data in the Scan Viewer" (page
6.7 Saving the Scanned Data to a Network Folder
"6.10 Enabling/Disabling the Scan Viewer" (page
287
339).
"6.11 Editing the
339).
"6.11 Editing the
336).