Fujitsu ScanSnap N1800 Operator's Manual page 398

In Internet Explorer, the security level for the target zone is set to [High]
on the [Security] tab in the [Tools] menu -[Internet Options].
For [Custom Level], [Prompt] or [Disable] is set for [Active scripting]
under [Scripting] in the [Settings] area.
■ Action
When connecting using the scanner name, the connection will be an intranet connection. If the
URL includes an IP address, the scanner will be connected using the Internet Zone.
Try the following settings for the corresponding zone.
1. In Internet Explorer, select the [Tools] menu
2. Enable active scripting in either of the following ways.
On the [Security] tab, click the [Default level] button to set [Security level for this zone] to
[Medium].
On the [Security] tab, click the [Custom level] button to set to [Enable] for [Active scripting]
under [Scripting] in the [Settings] area.
3. If connecting via the Internet zone, on the [Privacy] tab, set the level to below [Medium High].
4. Delete temporary internet files in either of the following ways:
For Internet Explorer 6.0
On the [General] tab, click the [Delete Files] button on [Temporary Internet Files].
For Internet Explorer 7
On the [General] tab, click the [Delete] button on [Browsing history], and press the [Delete
Files] button on [Temporary Internet Files].
For Internet Explorer 8 or Internet Explorer 9
On the [General] tab, click the [Delete] button on [Browsing history], then select the
[Temporary Internet Files] check box and press the [Delete] button.
For Internet Explorer 10
On the [General] tab, click the [Delete] button on [Browsing history], then select the
[Temporary Internet files and website files] check box and press the [Delete] button.
The scanner is in standby mode.
■ Action
Press the power button to start the scanner.
A proxy server is being used.
■ Action
Set the proxy server to not be used.
1. In Internet Explorer, select the [Tools] menu
2. Press the [LAN settings] button on the [Connections] tab.
3. Clear the [Use a proxy server for your LAN (These settings will not apply to dial-up or VPN
connection).] check box.
8.2 Network Connection Troubleshooting
[Internet Options].
[Internet Options].
398