Fujitsu ScanSnap N1800 Operator's Manual page 151

3. Enter a [Folder Alias] for the FTP server folder.
4. Enter an [FTP Path] for the FTP server folder.
5. Set a [Port Number] for the FTP server.
6. In the [User Name] and [Password] input fields, enter the authentication
information for logging in to the FTP server.
7. For [Authentication], specify whether or not to save the entered [User
Name] and [Password].
8. For [Protocol], specify how to access the FTP server.
9. For [Passive Mode], specify whether or not to access in passive mode.
ATTENTION
For the Central Admin Console, to use a Central Admin Server with an enabled firewall,
set the [Passive Mode] to [On].
10. For [Encryption], specify the type of encryption.
11. For [Proxy], specify whether or not a proxy server is to be used.
The [Proxy] setting is only available when a proxy server has been set on the [Proxy
Server] window. For details about proxy server settings, refer to
Proxy Server" (page
12. Press the [OK] button.
User authentication may be required to access the FTP server. When the user
name and password are valid, the [FTP Server Folder] window appears again
and the FTP server folder is set.
HINT
Select a readable and writable FTP server folder.
4.12 Setting Folders for Saving Scanned Data
116).
151
"4.8.5 Setting the