Rear View - Fujitsu ScanSnap N1800 Operator's Manual

Part Name
Top cover
Stacker

■ Rear View

Part Name
Ventilation ports
Power connector
LAN connector
Security cable slot
Open by pulling the top cover release catch towards you,
and holding the top cover by the sides to replace
consumable parts or clean inside the scanner.
Open before scanning. Scanned documents are ejected
on the stacker.
Ventilation ports
LAN connector
Power connector
Security cable slot
Lets out the heated air from the inside of the scanner to
the outside.
Connects the AC adapter to the scanner.
Connects the LAN cable to the scanner.
Slot for commercially available security cable to prevent
against theft.
The following security cable is recommended.
Cylindrical part: diameter 25 mm (max), length 50 mm
(max)
Type: Right angle
(includes bent part if a straight cable is used)
33
1.2 Part Names and Functions
Function
Function